The Leading Global Resource for the Bulk Solids Processing Market
Designer and manufacturer of custom engineered size reduction machinery
Dec is a leading global manufacturer of powder handling and containment systems
Klinkenberg BV is specialized in internal transport and bulk handling using screw conveyors
Individual advice and efficient solutions for the whole weighing technology process
Doubrava is one of the world's leading names in industrial plant constructions
Developer and manufacturer of top of the range safety and measurement products
Systems for cleaner, safer and more productive handling of bulk materials
Leading manufacturer of conveyors and material handling equipment
Pneumatic systems and support equipment for conveying, weighing and batching of dry materials
International specialist in the world of bulk materials and process technology
UTICA, NY - The vision of a greener future for the construction industry motivates Andrew Dennis, an architect here who founded a company dedicated to producing environmentally friendly cement-based products.
Instead of the heavy aggregates found in standard concrete, the materials made by GigaCrete Inc. include non silica based sands and byproducts of coal combustion, fly-ash and bottom-ash and recycled glass that are usually dumped into landfills. The recycled materials are mixed with GigaCrete's own mineral cement formulation, which requires less water and yields less carbon dioxide in production than Portland cement, according to the company. In addition, GigaCrete claims that its materials are lighter and easier to handle than conventional cement based materials.
GigaCrete makes several cement-based building products that are packaged in 50 lb (22.7 kg) bags and shipped in dry-powder form to users who mix them with water at the construction site. The bagged products include:
In addition, GigaCrete makes a wet mixture used in the production of its PanelSystem construction product, which includes lightweight panels cast in GigaCrete's plant and delivered to job sites ready for installation. The system also includes proprietary steel connectors and components for door and window openings.
GigaCrete products are comprised of two parts cement binder and up to three parts filler, which can be sand of different grain sizes or ash of various grades. The products are typically made using 80% filler and 20% binder.
Each ingredient is supplied in 3000 lb (1361 kg) bulk bags and unloaded by one of five bulk bag dischargers to make a batch, depending on recipe. The dischargers are supported on load cells that measure weight loss as flexible screw conveyors move material from hoppers below the dischargers, into a common, horizontal aeromechanical conveyor at ground-level. The material is fed into a vertically oriented, 12 ft (3.7 m) aeromechanical conveyor, which elevates the material before discharging it into a dry or wet mixer, depending on recipe.
Blending the ingredients
Both the dry and wet mixers are loaded with a 2000 lb (907 kg) batch of binder and filler material, with water in the wet mixer adding an extra 20% to the weight of the charge. For dry blending operations, GigaCrete uses a 20 cu ft (0.57 cu m) Rotary Batch Mixer from Munson Machinery, consisting of a horizontal rotating drum with a stationary inlet and outlet at opposite ends. As the drum rotates, internal mixing flights and lifters tumble, fold, cut and turn the material in a multidirectional manner. The gravity-driven process produces a 100% uniform mix in just two minutes, regardless of the difference in bulk densities of the ingredients.
The lifters in the continuously rotating drum elevate the material, preventing segregation of the batch upon discharge through the stationary plug gate valve, as well as promoting total evacuation with no residual. The discharged blend falls through a "pant leg" chute into a hopper and then into a turbopacker that can fill as many as four 50 lb (22.7 kg) bags a minute.
For the wet panel mix, GigaCrete uses a 100 cu ft (2.83 cu m) continuous paddle blender, also from Munson, consisting of a stationary mixing trough with rotating paddles that are driven through the material. The blender's horizontal shaft rotates inner and outer paddles with reversed pitches that move materials in opposing directions. A 2-to-1 agitator length-to-width ratio optimizes mixing performance, agitating the material during loading, 10-minute blending of solids and liquid, and discharge.
The paddle blender is also doing double duty as an additional dry mixer, and has a mobile impeller bagging machine beneath the output valve for that application.
The blender's design limits maximum mixing capacity to approximately 80% of total vessel volume, leaving sufficient space for material flow on the upswing side of the agitator. This also allows the spray manifold to be properly distanced from the material bed surface, which ensures even distribution of liquids added to mixtures.
Other key features include the stationary mixing trough's heavy-gauge walls and reinforced end panels, providing sufficient rigidity for tight agitator-to-vessel wall tolerances that minimize the "heel" of residual material after discharge.
Wet concrete mixtures gravity discharge from the paddle blender into a hopper, from which they are pumped 30 to 50 ft (9 to 15 m) into mold boxes measuring 2 ft by 9 ft by 4.25 in. (0.6 m by 2.7 m by 108 mm). After a day of curing, the panels are removed from the mold boxes and are ready for shipment.
From the rotary batch mixer the blend discharges into a hopper and then into the turbopacker.
GigaCrete's goal for the plant is to produce 6 million sq ft (558,000 sq m) of panels per year and 300,000 bags of dry material per eight-hour shift. These estimates were provided to Munson personnel, who used them to select mixing devices capable of meeting GigaCrete's output requirements. GigaCrete also provided Munson with material samples so the supplier could observe how the different densities affected the equipment considered for the dry and wet applications.
The GigaCrete corporate office is headquartered in Scottsdale, AZ, and its GigaLabs plant and R&D center is located in Las Vegas, NV. The company expects to open four more plants across the U.S. "This is the pilot factory," Dennis says of the Las Vegas facility. "The goal is to refine the process here and then use the final process in the next four plants."
© Munson Machinery Company, Inc. / BulkInside
This article is published by Munson Machinery Company, Inc.
Munson Machinery Company is a world-leading manufacturer of mixing, blending and size reduction equipment for bulk food, dairy, nutritional, pharmaceutical, and general chemical products. Established in 1823, Munson engineers each machine to suit ...View company page