The Leading Global Resource for the Bulk Solids Processing Market
International specialist in the world of bulk materials and process technology
Developer and manufacturer of top of the range safety and measurement products
Leading manufacturer of conveyors and material handling equipment
Individual advice and efficient solutions for the whole weighing technology process
Doubrava is one of the world's leading names in industrial plant constructions
Pneumatic systems and support equipment for conveying, weighing and batching of dry materials
Systems for cleaner, safer and more productive handling of bulk materials
Designer and manufacturer of custom engineered size reduction machinery
Dec is a leading global manufacturer of powder handling and containment systems
Systems for mechanical and thermal processing of dry and wet powders
Klinkenberg BV is specialized in internal transport and bulk handling using screw conveyors
CINCINNATI, OH - Wedron Silica has been producing round grain silica sand for over 100 years. Dry Screening equipment used at the facility in Wedron, Illinois faces harsh conditions 24 hours a day, seven days a week.
The sand mined at Wedron is used in the creation of proppants. Proppants are used to hold open the fractures made during the oil drilling process in place of the extracted oil.
ROTEX Global, the global leader in screening technologies, knew that Wedron Silica would put its new APEX™ dry separation screener to the test. Each day, the APEX Dry Screener needed to process over 150 tons of sand at the Wedron site. The APEX model A8G35-2 is a 35 square feet, two-deck separation screener making a sharp cut in product between 40 mesh and 70 mesh.
LISTENING LEADS TO INNOVATION
“We listened to our customers and the feedback they gave us,” says Rob Scheper, Business Development Manager with Rotex. “They wanted a screener that was easier to access and required fewer people to maintain. That led us to design and engineer the APEX.”
Rotex engineers started with the basic design of their efficient and long-successful ROTEX® Screener. The ROTEX Screener uses a unique gyratory-reciprocating motion that allows the machine to process material at a high capacity and improves dry screening performance for near-sized particles. There is no vertical component to this motion – thus keeping the material in constant contact with the screen surface.
“Most screeners use one large screen per separation,” says Scheper. Changing this screen from the top or tail end of the machine is cumbersome. Often the only way to inspect or replace a screen is to have a crane or several people on hand to help lift and remove the top cover and screen. The process is labor intensive and slow, consuming a significant portion of production time.
REDUCED SCREEN SIZE INCREASES EASE OF USE
Rotex engineered a screen that can be maintained by just one person while maintaining the optimal level of screen performance and life for which Rotex dry screeners are known throughout the industry. Rotex designed the dry screener with side access to the interior of the machine, using a series of smaller screen panels, “We divided the large screen into smaller, easier to handle panels and created a one man operation,” says Scheper. The total number of panels on a deck of the APEX depends on the size of the machine. The APEX screener at the Wedron site provides 35 square feet of screen area, with four panels per deck.
At Wedron Silica, hundreds of tons of mined sand is diverted in the screening tower. Wedron provided the perfect site for beta testing the APEX™—sand is one of the most difficult applications to screen.
“We worked on the panel size to assure the optimum level of performance and life,” says Scheper. “The tension on the screen is also important. Each panel is pre-tensioned and each section of the screen is matched up with the mesh cleaning balls in the tray to create a strong seal so there is no leakage.”
Weighing only five pounds, each APEX screen measures 30 by 42 inches and is available in sizes ranging from 1/2" inch to 325 mesh. “This is an easy size for one person to handle,” says Scheper. “We decided on this size because you can use a standard roll of screening cloth when you replace the screen and there isn’t much waste, a real savings for our customers.”
TESTED UNDER THE HARSHEST CONDITIONS
Rotex tested the APEX to make sure it would deliver the high quality and performance that its screeners are known for throughout the process industry. “Wedron provided the perfect site for testing the APEX. They separate a large volume of sand on a daily basis. Due to its abrasive nature, tendency to blind, and difficulty to separate by size, sand is one of the toughest applications available to test the APEX dry screener,” says Scheper.
The APEX™ screener at the Wedron site provides 35 square feet of screen area, with four panels per deck. The ergonomic design of the APEX™ enables the dry screener to be maintained by just one person.
At Wedron Silica, 150 tons of mined sand is diverted in the screening tower to the cable mounted APEX, which runs approximately 20 hours each day. The four hours of downtime are used for maintenance on other machines used in the process.
“It has a small footprint and makes a very efficient particle size cut,” says David Bach, Production Superintendent for Wedron Silica. “Maintenance of the screen cloth is a lot friendlier too. Now we can change a single worn out screen panel or complete an inspection of this screener with one person. This is not possible with our other machines.”
IMPROVED FUNCTIONALITY AND LOWER MAINTENANCE TIME INCREASES PROFIT MARGINS
“Process up-time has increased and the entire process is more efficient,” says Bach. The APEX requires significantly reduced maintenance resources, limited to changing screens and ball trays and greasing the slide bearings. Further engineering improvements include designing the door closures and sealing with strong, easy to operate clamps and hinges.
“We looked at a variety of ways to remove screens,” says Scheper. “What made the most sense for the customer was to design the machine with side access.” The doors are located at waist level, allowing for easy access to maintain the screens, seals, and ball trays.
“One of the best features is that one operator can open the doors and pull out a screen,” says Bach. “The reduced manpower, time needed to maintain the screens, seals and ball trays translates into increased production time and stronger profit margins, too.”
“It would usually take one to two people two hours to change a full size screen on a screener,” explains Scheper. “With the APEX unit a deck (four panels) can be changed by one person in about 10 minutes. You’ve just gained one hour and fifty minutes of operation time and saved valuable employee hours.”
“We also changed the ball tray design to make it easier for one operator to work with the tray,” says Scheper. “The ball tray weighs only 37 pounds and APEX is designed for side access. Removable side arms support the full weight of the tray, allowing the operator to easily perform maintenance tasks.”
Fairmont Minerals also operates several ROTEX® Minerals Separators™ at the Wedron site.
“Ball trays on other machines need two people and specific hand tools to move. APEX ball trays use only one piece that one person can easily manage. You just slide the ball trays out onto the support arms. It’s easier, and with a greatly reduced risk of worker injury or strain,” says Bach. “The interface between the operator and the machine is much less labor intensive.”
The operator can inspect the seals and the screens by opening the side access door. “We run the APEX 24/7 during testing to check for quality issues. Then we take a close look at the screens and replace the bad screen cloths,” says Bach. “It’s a lot easier to maintain and there’s a reduced risk of injury because the machine consists of smaller, easier to handle components,” says Bach.
“Since it’s so much easier to change screens, you’ll quickly find more uses for that piece of equipment,” says Bach. “You open the side access door and you’re in and out in just a few minutes. Changing the screen panels on the APEX is a piece of cake!”
© ROTEX GLOBAL LLC. / BulkInside
This article is published by Rotex Global, LLC.
The global leader in dry separation for process industries.
Since 1844, ROTEX has been a pioneer in the development of dry material screening equipment and technology – providing innovative solutions to a broad range of domestic and ...